Service Hotline: 13823761625

Products

Contact Us

You are here:Home >> Products >> DC-DC >> LDO

LDO

ME78L05

3-Terminal Positive Voltage Regulator ME78L05

ME78L05 is three-terminal positive regulators.One of these regulators can deliver up to 100 mA of output current. 

The internal limiting and thermal -shutdown features of the regulator make them essentially immune to overload. When used as a replacement for a zener diode-resistor Combination, an effective improvement in output impedance can be obtained, together with lower quiescent current.

ME78L05,ME78L05PG,ME78L05TG
    3-Terminal Positive Voltage Regulator ME78L05
    ME78L05,ME78L05PG,ME78L05TG

    ME78L05 General Description:
        ME78L05 is three-terminal positive regulators.One of these regulators can deliver up to 100 mA of output current. The internal limiting and thermal -shutdown features of the regulator make them essentially immune to overload. When used as a replacement for a zener diode-resistor Combination, an effective improvement in output impedance can be obtained, together with lower quiescent current.


    ME78L05 Operation Description:
        ME78L05 is designed with Thermal Overload Protection that shuts down the circuit when subjected to an excessive power overload condition, Internal Short Circuit Protection that limits the maximum current the circuit will pass, and Output Transistor Safe-Area Compensation that reduces the output short circuit current as the voltage across the pass transistor is increased.In many low current applications, compensation capacitors are not required. However, it is recommended that the regulator input be bypassed with a capacitor if the regulator is connected to the power supply filter with long wire lengths, or if the output load capacitance is large. An input bypass capacitor should be selected to provide good high frequency characteristics to insure stable operation under all load conditions. A 0.33μFor larger tantalum, mylar, or other capacitor having low internal impedance at high frequencies should be chosen. The bypass capacitor should be mounted with the shortest possible leads directly across the regulator’s input terminals. Normally good construction techniques should be used to minimize ground loops and lead resistance drops since the regulator has no external sense lead.


    ME78L05 Features:
    Output Current of 100mA
    Output Voltages of 5V±5% over the temperature range
    Thermal Overload Protection
    Short Circuit Protection
    Output transistor safe area protection
    No external components
    Package: SOT89-3


    ME78L05 Pin Configuration:


    ME78L05 Block Diagram:

    ME78L05 Typical Application Circuit:
    Fig.1 Fixed Output Regulator


    ME78L05 Typical Application Circuit:
    Fig.2 Constant Current Regulator





    ME78L05 Typical Application Circuit:
    Fig.3 Adjustable Output Regulator







    ME78L05 Package Information
    Package Type:SOT89-3
    Please submit your basic information and send an email Sales@ChipSourceTek.com , or call us at 13823761625 (the same number as wechat), and we will contact you as soon as possible!

    *

    *

    *

    *

Related products