Service Hotline: 13823761625

Products

Contact Us

You are here:Home >> Products >> MCU

MCU

CST5085A

    CST5085A series are 4-bits micro-controller which could play 4 channel melody or 4 channel ADPCM with PWM direct drive circuit. PWM resolution is 8/10/12 bits. They include a low cost, high performance CMOS micro-processor. The clock frequency of this up is typically 8.192 (±3%) MHz. This chip operates over a wide voltage range of 2.0V~5.5V. It contains program ROM (PROM) and data ROM (DROM) inside. 
    The maximum program ROM is 8K words and maximum data ROM size is 255K byte. The maximum working SRAM is (256+2) nibbles. It is provided with total 16 software programmable I/O Ports.
    CST5085A General Descriptions:
        CST5085A series are 4-bits micro-controller which could play 4 channel melody or 4 channel ADPCM with PWM direct drive circuit. PWM resolution is 8/10/12 bits. They include a low cost, high performance CMOS micro-processor. The clock frequency of this up is typically 8.192 (±3%) MHz. This chip operates over a wide voltage range of 2.0V~5.5V. It contains program ROM (PROM) and data ROM (DROM) inside. 
        The maximum program ROM is 8K words and maximum data ROM size is 255K byte. The maximum working SRAM is (256+2) nibbles. It is provided with total 16 software programmable I/O Ports.

    CST5085A Features:
    Operating voltage: 2.0V to 5.5V
    MCU Operation frequency: 8.192MHz 
    Memory Size 
      -Program ROM size: 8K*12-bits MASK type
      -Data ROM size: 255K*8-bits MASK type
      -SRAM size: 256*4 bits
      -User register: 2*4 bits
    Wakeup function for power-down mode: 
      -HALT mode wakeup source: Port A, Port B, Port D and Port E/CE can wake-up from HALT mode to NORMAL mode and executing wake-up sub-routine program. 
      -RTC wakeup: Clock source comes from internal LRCOSC, time period 1/16/64/128 ms. 
        RTC wakeup function only support in CST5165S1. 
    12 input/output pins: Port A, Port B and Port D can be defined as input or output port bit by bit. 
    4 input/output ports or 4 input only ports or 4 output only ports “Port CE/E/C” defined by option: 
      -If input only ports are employed, Port E defined as input only ports. 
      -If output only ports are employed, Port C defined as output only ports. 
      -If input/output ports are selected, Port CE defined as input/output ports bit by bit. 
    Four reset condition: 
      -Low voltage reset. (LVR = 2.0V) 
      -Power on reset. 
      -External reset pin. (active low) 
      -Watch dog timer overflow. 
    One internal interrupt sources: 
      -PWM interrupt. 
    WDT 
      -Watch dog timer, can enabled/disabled by option. 
      -WDT period is 256*256*16/Fsys. (WDT period is 0.13 sec for system clock=8.192MHz) 
    Audio output: 
      -Support PWM or DAC mode by option. 
      -Support 8/10/12 bits. 
    Support option set for pull down resistor 1M, 50K or 220K Ohm, reset pin (PB3 or PC3), low voltage reset…etc. 
    Oscillator fuse option ±3%, temperature & voltage compensation. 
    Support security option (1 bit) for read inhibition. 
    Support 16-levels LVD function.

    CST5085A提供SOP8, SOP16, SSOP24封装:
    CST5085A Block Diagram
    CST5085APort PCE mode block diagram


    CST5085A The Application Circuit

    DAC Selected by option

    Motor application
    Please submit your basic information and send an email Sales@ChipSourceTek.com , or call us at 13823761625 (the same number as wechat), and we will contact you as soon as possible!

    *

    *

    *

    *

Related products